Indexed journals

· Blanco, N., Gamstedt, E.K., Costa, J., 2008. Mechanical hinge system for delamination tests in beam-type composite specimens. Composites Science and Technology. In Press (doi:10.1016/j.compscitech.2008.01.011).

· Dávila, C.G., Camanho, P.P., Turon, A., 2007. Simulation of delamination in aeronautical structures using shells and cohesive elements. Journal of Aircraft. In Press (doi:10.2514/1.32832).

· Cruz Hidalgo,R., Zapperi, S.,  Herrmann, H.J., 2007. Discrete Fracture Model with Anisotropic Load Sharing. Journal of Statistical Mechanics: Theory and Experiment : Condensed Matter. In Press.

· Cruz Hidalgo,R., Sullivan, D.,  Cheng,J.Z., 2007. Smectic Phase in Rod-Coil Polymers. Journal of Physics: Condensed Matter,  19 (11), pp.  376107.

· Cruz Hidalgo,R., Pagonabarraga, I.,  2007. Fragmentation in Granular Gasses. Europhysics Letters,  77 (11), pp.  64001.

· Turon, A., Costa, J., Camanho, P.P., Dávila, C.G., 2007. Simulation of delamination in composites under high-cycle fatigue. Composites Part A,  38 (11), pp.  2270-2282. (doi:10.1016/j.compositesa.2006.11.009).

· Trias, D., García, R. , Costa, J., Blanco, N., Hurtado, J.E., 2007. Quality control of CFRP by means of digital image processing and statistical point pattern analysis. Composites Science and Technology,  67 (11-12), pp.  2438-2446. (doi:10.1016/j.compscitech.2006.12.023).

· Camanho, P.P., Maimí, P, Dávila, C.G., 2007. Prediction of size effects in notched laminates using continuum damage mechanics. Composite Science and Technology,  67 (13), pp. 2715-2727. (doi:10.1016/j.compscitech.2007.02.005)

· Maimí, P, Camanho, P.P., Mayugo, J.A., Dávila, C.G., 2007. A continuum damage model for composite laminates. Part II – Computational implementation and validation. Mechanics of Materials, 39 (10), pp. 909-919. (doi:10.1016/j.mechmat.2007.03.006).

· Maimí, P, Camanho, P.P., Mayugo, J.A., Dávila, C.G., 2007. A continuum damage model for composite laminates. Part I: Constitutive model. Mechanics of Materials, 39 (10), pp. 897-908. (doi:10.1016/j.mechmat.2007.03.005).

· Turon, A., Dávila, C.G., Camanho, P.P., Costa, J., 2007. An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models. Engineering Fracture Mechanics, 74(10), pp. 1665-1682. (doi:10.1016/j.engfracmech.2006.08.025).

· Blanco, N., Gamstedt, E.K., Costa, J., Trias, D., 2006. Analysis of the Mixed-Mode End Load Split delamination test. Composite Structures, 76(1-2), pp. 14-20. (doi:10.1016/j.compstruct.2006.06.003).

· Trias, D., Costa, J., Fiedler, B., Hobbiebrunken, T., Hurtado, J.E., 2006. A two-scale method for matrix cracking probability in fibre-reinforced composites based on a Statistical Representative Volume Element. Composites Science and Technology, 66 (11-12), pp. 1766-1777. (doi:10.1016/j.compscitech.2005.10.030).

· Trias, D., Costa, J., Mayugo, J.A., Hurtado, J.E., 2006. Random models versus periodic models for fibre reinforced composites. Computational Materials Science, 38(2), pp. 316-324. (doi:10.1016/j.commatsci.2006.03.005)

· Trias, D., Costa, J., Turon, A., Hurtado, J.E., 2006. Determination of the critical size of a Statistical Representative Volume Element (SRVE) for carbon reinforced polymers. Acta Materialia, 54(13), pp. 3471-3484. (doi:10.1016/j.actamat.2006.03.042).

· Turon, A., Camanho, P.P., Costa, J., Dávila, C.G., 2006. A damage model for the simulation of delamination in advanced composites under variable-mode loading. Mechanics of Materials, 38(11), pp. 1072-1089.  (doi:10.1016/j.mechmat.2005.10.003).

· Barbero, E.J., Trovillion, J., Mayugo, J.A., Sikkil, K.K., 2006. Finite element modeling of plain weave fabrics from photomicrograph measurements. Composite Structures 73(1), pp. 41-52. (doi:10.1016/j.compstruct.2005.01.030).

· Blanco, N., Turon, A., Costa, J., 2006. An exact solution for the determination of the mode mixture in the Mixed-Mode Bending delamination test. Composites Science and Technology 66(10), pp. 1256-1258. (doi:10.1016/j.compscitech.2005.10.028).

· Costa, J., Turon, A., Trias, D., Blanco, N., Mayugo, J.A., 2005. A progressive damage model for unidirectional fibre-reinforced composites based on fibre fragmentation. Part II: Stiffness reduction in environment sensitive fibres under fatigue. Composites Science and Technology, 65(14), pp. 2269-2275. (doi:10.1016/j.compscitech.2005.05.011)

· Turon, A., Costa, J., Maimi, P., Trias, D., Mayugo, J.A., 2005. A progressive damage model for unidirectional fibre-reinforced composites based on fibre fragmentation. Part I: Formulation. Composites Science and Technology, 65(13), pp. 2039-2048. (doi:10.1016/j.compscitech.2005.04.012)

· Blanco, N., Gamstedt, E.K., Asp, L.E., Costa, J., 2004. Mixed-mode delamination growth in carbon-fibre composite laminates under cyclic loading. International Journal of Solids and Structures 41(15), pp. 4219-4235.  (doi:10.1016/j.ijsolstr.2004.02.040)

· Bozzo, L., Torres, L. 2004. A proposed semi-prefabricated prestressed composite steel-concrete slab. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 157(5), pp. 309-317. (doi: 10.1680/stbu.157.5.309.46673)

· Torres, L., López Almansa F., Bozzo, L. 2004. Tension-stiffening model for cracked flexural concrete members. Journal of Structural Engineering (ASCE), 130 (8), pp. 1242-1251. (doi:10.1061/(ASCE)0733-9445(2004)130:8(1242))

· Torres, L., López Almansa, F., Cahís, X., Bozzo, L., 2003. A numerical model for sequential construction, repairing and strengthening of 2-D concrete frames. Engineering Structures 25(3), pp. 323-336. (doi:10.1016/S0141-0296(02)00161X).

Non indexed journals and others
      up

· Mayugo J.A., Camanho P.P., Maimí P., Dávila C.G., 2006.  A Micromechanics-Based Damage Model for  [+-theta 90n]s Composite Laminates. NASA/TM-2006-214285.

· Maimí P., Camanho P.P., Mayugo J.A., Dávila C.G., 2006. A thermodynamically consistent damage model for advanced composites. NASA/TM-2006-214282.

· Turon, A., Camanho, P.P., Costa, J., Dávila, C.G., 2005. An engineering solution for using coarse meshes in the simulation of delamination with cohesive zone models. NASA-TM 212547.

· Llorens, M., Torres, L., Roca, P., González, J.L. (editors), 2004. Seminari sobre l'estudi i restauració estructural de les catedrals gòtiques de la corona catalano-aragonesa. Diversitas, 47, Universitat de Girona, pp. 204.

· Turon, A., Camanho, P.P., Costa, J., Dávila, C.G., 2004. An interface damage model for the simulation of delamination under variable-mode ratio in composite materials. NASA-TM 213277.

· Blanco, N., Gamstedt, E.K., Asp, L.E., Costa, J., 2003. Mixed-mode delamination in a carbon-fibre composite laminate under cyclic loading. SME-TP EM03-343, Society of Manufacturing Engineers, Dearborn (USA).

· Turon, A., Costa, J., Trias, D., Mayugo, J.A., Blanco, N., 2003. Fatigue life of unidirectional polymer-matrix composites considering a weibull probability distribution for the brittle failure of the fibers. SME-TP TP03PUB312, Society of Manufacturing Engineers, Dearborn (USA).

· Torres, L., Cahís, X., López Almansa, F., Bozzo, L., 2003. Modelo de comportamiento en servicio para estructuras de hormigón. Parte I: descripción del modelo y ejemplos de aplicación. Hormigón y Acero, 227, pp. 43-53.

· Torres, L., Cahís, X., López Almansa, F., Bozzo, L., 2003. Modelo de comportamiento en servicio para estructuras de hormigón. Parte II: diagrama tensión-deformación para elementos fisurados a flexión. Hormigón y Acero, 227, pp. 55-65.

· Costa, J., Blanco, N., Mayugo, J.A., 2002. Fenomenología del daño y fatiga en materiales compuestos de matriz polimérica reforzados con fibras continuas. Análisis y cálculo de estructuras de materiales compuestos. (Ed.) Oller, S. Centro Internacional de Métodos Numéricos en Ingeniería (CIMNE), Barcelona, pp. 321-346.

· Mayugo, J.A., Martínez, V., Blanco, N., Costa, J., 2002. Diseño de estructuras en materiales compuestos - Aplicación a palas de aerogenerador. Análisis y cálculo de estructuras de materiales compuestos. (Ed.) Oller, S. Centro Internacional de Métodos Numéricos en Ingeniería (CIMNE), Barcelona, pp. 433-456.

· Cahís, X., Torres, L., Bozzo, L., 2001. Nuevo disipador para edificación sismorresistente. 1ª parte: caracterización y modelos de predicción. Hormigón y Acero, 219, pp. 91-101.

· Cahís, X., Torres, L., Bozzo, L., 2001. Nuevo disipador para edificación sismorresistente. 2ª parte: comportamiento de estructuras duales de un grado de libertad con disipadores. Hormigón y Acero, 220, pp. 57-67.

· Cahís, X., Foti, D., Torres, L., Bozzo, L., 2001. Experimental investigations on semi-active and passive systems for seismic risk mitigation. Part II: Experimental behaviour of a new steel shear disipator. Characterization and response in a S.D.O.F. system. Report no. 7 ECOEST2/ICONS series, ISMES S.p.A., Lab. Nacional de Engenharia Civil (Lisboa), pp. II.1-II.100.

Contributions made to international conferences in the last 5 years
      up

· Camanho P.P., Maimí P., Mayugo J.A., Dávila C.G., 2006. A damage model for composite laminates. Conference on Damage in Composite Materials: Simulation and Non-Destructive Testing, Stuttgart (Alemanya).

· Blanco, N., Gamstedt, E.K., Costa, J., Trias, D., 2005. Analysis of the Mixed-Mode End Load Split delamination test. 15th International Conference on Composite Materials (ICCM-15), Durban (Sud-àfrica).

· Camanho P.P., Dávila C.G., Maimí P., Mayugo J.A., 2005. A continuum damage model to predict ultimate failure of composite structures. 15th International Conference on Composite Materials (ICCM-15), Durban (Sud-àfrica).

· Renart, J., Turon, A., Costa, J., 2005. Investigation of geometry effects on the Gc determination of adhesives by means of decohesion elements. 4th International Conference on Fracture of Polymers, Composites and Adhesives, Ginebra (Suïssa).

· Trias, D., Costa, J., Turon, A., Hurtado, J.E., 2005. The size of a Statistical Representative Volume Element (SRVE). Micromechanics and Microstructure Evolution: Modeling Simulation and Experiments, Madrid (Espanya).

· Turon, A., Camanho, P.P, Costa, J., Dávila. C.G., 2004. A continuum damage model for the simulation of variable-mode ratio in composite materials. Comptest 2004, Bristol (UK), pp. 21-23.

· Blanco, N., Gamstedt, E.K., Asp, L.E., Costa, J., 2003. Mixed-mode delamination in a carbon-fibre composite laminate under cyclic loading. 14th International Conference on Composite Materials (ICCM-14), San Diego (USA).

· Turon, A., Costa, J., Trias, D., Mayugo, J.A., Blanco, N., 2003. Fatigue life of unidirectional polymer-matrix composites considering a weibull probability distribution for the brittle failure of the fibers. 14th International Conference on Composite Materials (ICCM-14), San Diego (USA).

· Costa, J., Renart, J., Blanco, N., Mayugo, J.A., Gascons, N., 2002. Fatigue life prediction of composite laminates based on the critical direction theory. International Conference on Modern Materials & Technologies (CIMTEC-2002), Florència (Itàlia).

· Blanco, N., Mayugo, J.A., Trias, D., Costa, J., 2002. Constitutive model for the fatigue life prediction of composite laminates based on the critical and sub-critical directions. 10th European Conference on Composite Materials (ECCM-10), Bruges (Bèlgica).

· Mayugo, J.A., Costa, J., Blanco, N., Oller, S., 2002. A constitutive model for the fatigue life prediction of composite materials based on continuum damage mechanics. 10th European Conference on Composite Materials (ECCM-10), Bruges (Bèlgica).

· Costa, J., Mayugo, J.A., Car, E., Oller, S., 2001. Numerical and experimental study of the elastoplastic behaviour of GFRP laminates. 13th International Conference on Composite Materials (ICCM-13), Pequin (Xina).

· Martínez, V., Güemes, A., Blanco, N., Costa, J., 2001. Three-dimensional stress analysis of the T-bolt joint. 13th International Conference on Composite Materials (ICCM-13), Pequin (Xina).

Doctorates
      up

· Maimí, P., 2007. Modelización constitutiva y computacional del daño y la fractura de materiales compuestos. Universitat de Girona (ISBN: 84-xxx-xxx-x, edició en format digital). 

· Turon, A., 2006. Simulation of delamination in composites under quasi-static and fatigue loading using cohesive zone models. Universitat de Girona (ISBN: 84-690-4372-1, edició en format digital). 

· Blanco, N., 2005. Variable mixed-mode delamination in composite laminates under fatigue conditions: testing & analysis. Universitat de Girona (ISBN: 84-689-0990-4, edició en format digital).

· Ripoll, L., 2005. Análisis y diseño de volantes de inercia de materiales compuestos. Universitat Politècnica de Catalunya. 

· Trias, D., 2005. Analysis and simulation of transverse random fracture of long fibre reinforced composites. Universitat de Girona (ISBN: 84-689-3089-X, edició en format digital).

· Mayugo, J.A., 2003. Estudio constitutivo de materiales compuestos laminados sometidos a cargas cíclicas. Universitat Politècnica de Catalunya (ISBN: 84-688-3881-0, edició en format digital).