Publications

  1. Title: A 3D Progressive Failure Model for predicting pseudo-ductility in hybrid unidirectional composite materials under fibre tensile loading
    Author(s): Guerrero, J. M.; Mayugo, J. A.; Costa, J.; et al.
    Source: Composites Part a-Applied Science and Manufacturing Volume: 107 Pages: 579-591 Published: 2018
    Times Cited: 0
    DOI: 10.1016/j.compositesa.2018.02.005 
  2. Title: A 3D tomographic investigation to elucidate the low-velocity impact resistance, tolerance and damage sequence of thin non-crimp fabric laminates: effect of ply-thickness
    Author(s): Garcia-Rodriguez, S. M.; Costa, J.; Bardera, A.; et al.
    Source: Composites Part a-Applied Science and Manufacturing Volume: 113 Pages: 53-65 Published: 2018
    Times Cited: 0
    DOI: 10.1016/j.compositesa.2018.07.013 
  3. Title: A 3D transversally isotropic constitutive model for advanced composites implemented in a high performance computing code
    Author(s): Quintanas-Corominas, A.; Maimi, P.; Casoni, E.; et al.
    Source: European Journal of Mechanics a-Solids Volume: 71 Pages: 278-291 Published: 2018
    Times Cited: 0
    DOI: 10.1016/j.euromechsol.2018.03.021 
  4. Title: Accurate simulation of delamination under mixed-mode loading using a cohesive model with a mode-dependent penalty stiffness
    Author(s): Turon, A.; Gonzalez, E. V.; Sarrado, C.; et al.
    Source: Composite Structures Volume: 184 Pages: 506-511 Published: 2018
    Times Cited: 3
    DOI: 10.1016/j.compstruct.2017.10.017 
  5. Title: An experimental study on cracking and deformations of tensile concrete elements reinforced with multiple GFRP bars
    Author(s): Gribniak, V.; Rimkus, A.; Torres, L.; et al.
    Source: Composite Structures Volume: 201 Pages: 477-485 Published: 2018
    Times Cited: 0
    DOI: 10.1016/j.compstruct.2018.06.059 
  6. Title: Analytical model for predicting the tensile strength of unidirectional composites based on the density of fiber breaks
    Author(s): Vanegas-Jaramillo, J. D.; Turon, A.; Costa, J.; et al.
    Source: Composites Part B-Engineering Volume: 141 Pages: 84-91 Published: 2018
    Times Cited: 0
    DOI: 10.1016/j.compositesb.2017.12.012 
  7. Title: Bond behavior of NSM CFRP laminates in concrete under sustained loading
    Author(s): Emara, M.; Barris, C.; Baena, M.; et al.
    Source: Construction and Building Materials Volume: 177 Pages: 237-246 Published: 2018
    Times Cited: 0
    DOI: 10.1016/j.conbuildmat.2018.05.050 
  8. Title: Bond response of NSM CFRP strips in concrete under sustained loading and different temperature and humidity conditions
    Author(s): Emara, M.; Torres, L.; Baena, M.; et al.
    Source: Composite Structures Volume: 192 Pages: 1-7 Published: 2018
    Times Cited: 1
    DOI: 10.1016/j.compstruct.2018.02.048 
  9. Title: Demonstration of Single-Barium-Ion Sensitivity for Neutrinoless Double-Beta Decay Using Single-Molecule Fluorescence Imaging
    Author(s): McDonald, A. D.; Jones, B. J. P.; Nygren, D. R.; et al.
    Source: Physical Review Letters Volume: 120 Issue: 13 Published: 2018
    Times Cited: 1
    DOI: 10.1103/PhysRevLett.120.132504 
  10. Title: Effect of axial stiffness of NSM FRP reinforcement and concrete cover confinement on flexural behaviour of strengthened RC beams: Experimental and numerical study
    Author(s): Sharaky, I. A.; Baena, M.; Barris, C.; et al.
    Source: Engineering Structures Volume: 173 Pages: 987-1001 Published: 2018
    Times Cited: 0
    DOI: 10.1016/j.engstruct.2018.07.062 
  11. Title: Electron drift properties in high pressure gaseous xenon
    Author(s): Simon, A.; Felkai, R.; Martinez-Lema, G.; et al.
    Source: Journal of Instrumentation Volume: 13 Published: 2018
    Times Cited: 1
    DOI: 10.1088/1748-0221/13/07/p07013 
  12. Title: Experimental methodology for obtaining fatigue crack growth rate curves in mixed-mode I-II by means of variable cyclic displacement tests
    Author(s): Jaeck, I.; Carreras, L.; Renart, J.; et al.
    Source: International Journal of Fatigue Volume: 110 Pages: 63-70 Published: 2018
    Times Cited: 0
    DOI: 10.1016/j.ijfatigue.2018.01.016 
  13. Title: Experimental study on the bond behaviour of a transversely compressed mechanical anchorage system for externally bonded reinforcement
    Author(s): Barris, C.; Correia, L.; Sena-Cruz, J.
    Source: Composite Structures Volume: 200 Pages: 217-228 Published: 2018
    Times Cited: 0
    DOI: 10.1016/j.compstruct.2018.05.084 
  14. Title: Helium-Xenon mixtures to improve the topological signature in high pressure gas xenon TPCs
    Author(s): Felkai, R.; Monrabal, F.; Gonzalez-Diaz, D.; et al.
    Source: Nuclear Instruments & Methods in Physics Research Section a-Accelerators Spectrometers Detectors and Associated Equipment Volume: 905 Pages: 82-90 Published: 2018
    Times Cited: 0
    DOI: 10.1016/j.nima.2018.07.013 
  15. Title: Low velocity impact and compression after impact simulation of thin ply laminates
    Author(s): Soto, A.; Gonzalez, E. V.; Maimi, P.; et al.
    Source: Composites Part a-Applied Science and Manufacturing Volume: 109 Pages: 413-427 Published: 2018
    Times Cited: 1
    DOI: 10.1016/j.compositesa.2018.03.017 
  16. Title: Microscopic simulation of xenon-based optical TPCs in the presence of molecular additives
    Author(s): Azevedo, C. D. R.; Gonzalez-Diaz, D.; Biagi, S. F.; et al.
    Source: Nuclear Instruments & Methods in Physics Research Section a-Accelerators Spectrometers Detectors and Associated Equipment Volume: 877 Pages: 157-172 Published: 2018
    Times Cited: 3
    DOI: 10.1016/j.nima.2017.08.049 
  17. Title: Numerical simulation of two-dimensional in-plane crack propagation in FRP laminates
    Author(s): Cameselle-Molares, A.; Vassilopoulos, A. P.; Renart, J.; et al.
    Source: Composite Structures Volume: 200 Pages: 396-407 Published: 2018
    Times Cited: 0
    DOI: 10.1016/j.compstruct.2018.05.136 
  18. Title: Reliability-based dynamical design of a singular structure for high energy physics experiments
    Author(s): Palma, R.; Torrent, J.; Perez-Aparico, J. L.; et al.
    Source: Archives of Civil and Mechanical Engineering Volume: 18 Issue: Pages: 256-266 Published: 2018
    Times Cited: 0
    DOI: 10.1016/j.acme.2017.07.003 
  19. Title: Simulating drop-weight impact and compression after impact tests on composite laminates using conventional shell finite elements
    Author(s): Gonzalez, E. V.; Maimi, P.; Martin-Santos, E.; et al.
    Source: International Journal of Solids and Structures Volume: 144 Pages: 230-247 Published: 2018
    Times Cited: 0
    DOI: 10.1016/j.ijsolstr.2018.05.005 
  20. Title: Study of the loss of xenon scintillation in xenon-trimethylamine mixtures
    Author(s): Trindade, A. M. F.; Escada, J.; Cortez, A. F. V.; et al.
    Source: Nuclear Instruments & Methods in Physics Research Section a-Accelerators Spectrometers Detectors and Associated Equipment Volume: 905 Pages: 22-28 Published: 2018
    Times Cited: 0
    DOI: 10.1016/j.nima.2018.07.020 
  21. Title: The effect interleaving has on thin-ply non-crimp fabric laminate impact response: X-ray tomography investigation
    Author(s): Garcia-Rodriguez, S. M.; Costa, J.; Singery, V.; et al.
    Source: Composites Part a-Applied Science and Manufacturing Volume: 107 Pages: 409-420 Published: 2018
    Times Cited: 1
    DOI: 10.1016/j.compositesa.2018.01.023 
  1. Title: A benchmark study of simulation methods for high-cycle fatigue-driven delamination based on cohesive zone models
    Author(s): Bak, B. L. V.; Turon, A.; Lindgaard, E.; et al.
    Source: Composite Structures Volume: 164 Pages: 198-206 Published: 2017
    Times Cited: 1
    DOI: 10.1016/j.compstruct.2016.11.081
  2. Title: A fatigue damage and residual strength model for unidirectional carbon/epoxy composites under on-axis tension-tension loadings
    Author(s): Llobet, J.; Maimi, P.; Mayugo, J. A.; et al.
    Source: International Journal of Fatigue Volume: 103 Pages: 508-515 Published: 2017
    Times Cited: 0
    DOI: 10.1016/j.ijfatigue.2017.06.026
  3. Title: An efficient methodology for the experimental characterization of mode II delamination growth under fatigue loading
    Author(s): Carreras, L.; Renart, J.; Turon, A.; et al.
    Source: International Journal of Fatigue Volume: 95 Pages: 185-193 Published: 2017
    Times Cited: 3
    DOI: 10.1016/j.ijfatigue.2016.10.017 
  4. Title: Application and performance of an ML-EM algorithm in NEXT
    Author(s): Simon, A.; Lerche, C.; Monrabal, F.; et al.
    Source: Journal of Instrumentation Volume: 12 Published: 2017
    Times Cited: 2
    DOI: 10.1088/1748-0221/12/08/p08009 
  5.  Title: Background rejection in NEXT using deep neural networks
    Author(s): Renner, J.; Farbin, A.; Munoz Vidal, J.; et al.
    Source: Journal of Instrumentation Volume: 12 Published: 2017
    Times Cited: 14
    DOI: 10.1088/1748-0221/12/01/t01004 
  6.  Title: Deformation analysis of reinforced concrete ties: Representative geometry
    Author(s): Gribniak, V.; Rimkus, A.; Torres, L.; et al.
    Source: Structural Concrete Volume: 18 Issue: Pages: 634-647 Published: 2017
    Times Cited: 2
    DOI: 10.1002/suco.201600105 
  7.  Title: Dynamic Identification and Static Loading Tests of Timbrel Vaults: Application to a Modernist 20th Century Heritage Structure
    Author(s): Endo, Y.; Llorens, M. S.; Roca, P.; et al.
    Source: International Journal of Architectural Heritage Volume: 11 Issue: Pages: 607-620 Published: 2017
    Times Cited: 0
    DOI: 10.1080/15583058.2016.1277566 
  8. Title: Effect of sustained loading and environmental conditions on the creep behavior of an epoxy adhesive for concrete structures strengthened with CFRP laminates
    Author(s): Emara, M.; Torres, L.; Baena, M.; et al.
    Source: Composites Part B-Engineering Volume: 129 Pages: 88-96 Published: 2017
    Times Cited: 5
    DOI: 10.1016/j.compositesb.2017.07.026 
  9.  Title: Effective simulation of the mechanics of longitudinal tensile failure of unidirectional polymer composites
    Author(s): Tavares, Rodrigo P.; Otero, Fermin; Turon, Albert; et al.
    Source: International Journal of Fracture Volume: 208 Issue: 1-2 Pages: 269-285 Published: 2017
    Times Cited: 0
    DOI: 10.1007/s10704-017-0252-9 
  10. Title: Experimental identification of cracking parameters of concrete ties with different reinforcement and testing layouts
    Author(s): Rimkus, A.; Jakstaite, R.; Kupliauskas, R.; et al.
    Source: Modern Building Materials, Structures and Techniques Volume: 172 Pages: 930-936 Published: 2017
    Times Cited: 1
    DOI: 10.1016/j.proeng.2017.02.104 
  11. Title: Experimental study into compression after impact strength of laminates with conventional and nonconventional ply orientations
    Author(s): Liv, Y.; Guillamet, G.; Costa, J.; et al.
    Source: Composites Part B-Engineering Volume: 126 Pages: 133-142 Published: 2017
    Times Cited: 2
    DOI: 10.1016/j.compositesb.2017.05.074 
  12. Title: Experimental study on crack width and crack spacing for Glass-FRP reinforced concrete beams
    Author(s): Barris, C.; Torres, L.; Vilanova, I.; et al.
    Source: Engineering Structures Volume: 131 Pages: 231-242 Published: 2017
    Times Cited: 2
    DOI: 10.1016/j.engstruct.2016.11.007 
  13. Title: Modelling and simulation of tow-drop effects arising from the manufacturing of steered-fibre composites
    Author(s): Falco, O.; Lopes, C. S.; Naya, F.; et al.
    Source: Composites Part a-Applied Science and Manufacturing Volume: 93 Pages: 59-71 Published: 2017
    Times Cited: 4
    DOI: 10.1016/j.compositesa.2016.11.015
  14. Title: Progressive failure analysis of DCB bonded joints using a new elastic foundation coupled with a cohesive damage model
    Author(s): Cabello, M.; Turon, A.; Zurbitu, J.; et al.
    Source: European Journal of Mechanics a-Solids Volume: 63 Pages: 22-35 Published: 2017
    Times Cited: 2
    DOI: 10.1016/j.euromechsol.2016.12.004 
  15. Title: Radiopurity assessment of the energy readout for the NEXT double beta decay experiment
    Author(s): Cebrian, S.; Perez, J.; Bandac, I.; et al.
    Source: Journal of Instrumentation Volume: 12 Published: 2017
    Times Cited: 0
    DOI: 10.1088/1748-0221/12/08/t08003 
  16. Title: Secondary scintillation yield of xenon with sub-percent levels of CO2 additive for rare-event detection
    Author(s): Henriques, C. A. O.; Freitas, E. D. C.; Azevedo, C. D. R.; et al.
    Source: Physics Letters B Volume: 773 Pages: 663-671 Published: 2017
    Times Cited: 5
    DOI: 10.1016/j.physletb.2017.09.017 
  17. Title: Specimen geometry and specimen size dependence of the -curve and the size effect law from a cohesive model point of view
    Author(s): Ortega, Adrian; Maimi, Pere; Gonzalez, Emilio V.; et al.
    Source: International Journal of Fracture Volume: 205 Issue: Pages: 239-254 Published: 2017
    Times Cited: 3
    DOI: 10.1007/s10704-017-0195-1 
  18. Title: Translaminar fracture toughness of interply hybrid laminates under tensile and compressive loads
    Author(s): Ortega, A.; Maimi, P.; Gonzalez, E. V.; et al.
    Source: Composites Science and Technology Volume: 143 Pages: 1-12 Published: 2017
    Times Cited: 6
    DOI: 10.1016/j.compscitech.2017.02.029 
  1. Title:On the validity of linear elastic fracture mechanics methods to measure the fracture toughness of adhesive joints
    Author(s): C. Sarrado; A. Turon; J. Costa; J. Renart
    Source: International Journal of Solids and Structures, Volume 81 Pages 100-116. Published 2016
    DOI: doi.org/10.1016/j.ijsolstr.2015.11.016
  2. Title: An experimental analysis of the fracture behavior of composite bonded joints in terms of cohesive laws
    Author(s): C. Sarrado; A. Turon; J. Costa; J. Renart
    Source: Composites Science and Technology Volume: 90 Pages: 234-242 Published: 2016
    DOI:doi.org/10.1016/j.compositesa.2016.07.004
  3. Title: An automated methodology for mode II delamination tests under fatigue loading based on the real time monitoring of the specimen’s compliance
    Author(s): J. Renart; J. Vicens; S. Budhe; A. Rodríguez-Bellido; J. Comas; J.A. Mayugo; J. Costa
    Source: Composites. Part A, Applied science and manufacturing Volume: 82 Pages: 634-642 Published: 2016
    DOI: doi:10.1016/j.ijfatigue.2015.09.021
  4. Title: Bond behaviour between recycled aggregate concrete and glass fibre reinforced polymer bars
    Author(s): Baena, M.; Torres, L.; Turon, A.; Llorens, M.; Barris, C.
    Source:Construction and Building Materials Volume: 106 Pages: 449- 460 Published: 2016
    DOI: 10.1016/j.conbuildmat.2015.12.145
  5. Title:A quasi-static indentation test to elucidate the sequence of damage events in low velocity impacts on composite laminates
    Author(s):A. Wagih; P. Maimí; N. Blanco; J. Costa
    Source: International Journal of Fatigue Volume: 82 Pages: 180-189 Published: 2016
    DOI: doi:10.1016/j.compositesa.2015.11.041
  6. Title:Characterization of the translaminar fracture cohesive law
    Author(s):Adrián Ortega; Pere Maimí; Emilio Vicente Gonz ález; Daniel Trias
    Source: Composites. Part A, Applied science and manufacturing Available online 16 February 2016. Published: 2016
    DOI:doi:10.1016/j.compositesa.2016.01.019
  7. Title:A quick procedure to predict free-edge delamination in thin-ply laminates under tension
    Author(s): G . Guillamet; A. Turon; J. Costa; P. Linde
    Source: Engineering Fracture Mechanics Available online 22 January 2016. Published: 2016
    DOI:doi:10.1016/j.engfracmech.2016.01.019
  8. Title:Damage sequence in thin-ply composite laminates under out-of-plane loading
    Author(s): A. Wagih; P. Maimí; E.V. González; N. Blanco; J.R. Sainz de Aja; F.M. de la Escalera; R. Olsson; E. Alvarez
    Source: Composites. Part A, Applied science and manufacturing  Volume: 87 Pages: 66-77  Published: 2016
    DOI:doi:10.1016/j.compositesa.2016.04.010
  9. Title:Finite-thickness cohesive elements for modeling thick adhesives, Engineering Fracture Mechanics
    Author(s); Sarrado, C.; Leone, F.A.; Turon, A
    Source:Engineering Fracture Mechanics Available Online in March 2016 Published: 2016
    DOI:doi.org/10.1016/j.engfracmech.2016.03.020
  10. Title:A general analytical model based on elastic foundation beam theory for adhesively bonded DCB joints either with flexible or rigid adhesives
    Author(s); M. Cabello; J. Zurbitu; J. Renart; A. Turon; F. Martínez
    Source: International Journal of Solids and Structures Volume: 94-95 Pages: 21-34  Published: 2016
    DOI:doi:10.1016/j.ijsolstr.2016.05.011 
  11. Title:Progressive failure analysis of DCB bonded joints using a new elastic foundation coupled with a cohesive damage model
    Author(s): M. Cabello; A. Turon; J. Zurbitu; J. Renart; C. Sarrado; F. Martínez
    Source: International Journal of Plasticity Volume: Pages: Published: 2016
    DOI:doi.org/10.1016/j.euromechsol.2016.12.004
  12. Title: First proof of topological signature in the high pressure xenon gas TPC with electroluminescence amplification for the NEXT experiment
    Author(s); P. Ferrario, .., L.Ripoll
    Source: Journal of High Energy Physics Volume:1 Published: 2016
    DOI:doi.org/10.1007/JHEP01(2016)104
  13. Title:Sensitivity of NEXT-100 to neutrinoless double beta decay
    Author(s); J. Martín-Albo,.., L. Ripolll
    Source: Journal of High Energy Physics Volume:1 Published: 2016
    DOI:doi.org/10.1007/JHEP05(2016)159
  14. Title:Bond-dependent coefficient of glass- and carbon-FRP bars in normal and high-strength concretes
    Author(s); El-Nemr A.; Ahmed EA; Barris C; Benmokrane B
    Source:Construction and Building Materials Volume:113 Pages 77-89 Published: 2016
    DOI:doi.org/10.1016/j.conbuildmat.2016.03.005
  15. Title:Experimental study of the influence of adhesive properties and bond length on the bond behaviour of NSM FRP bars in concrete
    Author(s); Torres, L.; Sharaky, I.A.; Barris, C.; Baena
    Source:Journal of Civil Engineering and Management s Volume:22 Pages 808-817 Published: 2016
    DOI:doi.org/10.3846/13923730.2014.914097
  16. Title:Numerical simulation of bond-slip interface and tension stiffening in GFRP RC tensile elements
    Author(s); Vilanova, I.; Torres, L.; Baena, M.; Llorens, M
    Source:Composite Structures Volume:153 Pages 504–513 Published: 2016
    DOI:doi:10.1016/j.compstruct.2016.06.048
  17. Title:Predictive model for the spherical indentation of composite laminates with finite thickness, Composite Structures
    Author(s); A. Wagih, P. Maimí, N. Blanco, D. Trias
    Source:Composite Structures Volume:153 Pages 468- 477 Published: 2016
    DOI:doi.org/10.1016/j.compstruct.2016.06.056
  18. Title:A data reduction method based on the J-integral to obtain the interlaminar fracture toughness in a mode II end-loaded split (ELS) test
    Author(s); Pérez-Galmés, M.; Renart, J.; Sarrado, C.; Rodríguez-Bellido, A.; Costa, J.
    Source:Composites. Part A, Applied science and manufacturing Volume:90 Pages 670- 677 Published: 2016
    DOI:doi.org/10.1016/j.compositesa.2016.08.020
  19. Title:Cohesive zone length of orthotropic materials undergoing delamination
    Author(s); Soto, A.; González, E.V.; Maimí, P.; Turon, A.; Sainz de Aja, J.R.; de la Escalera
    Source:Engineering Fracture Mechanicss Volume:159 Pages 174-188- 477 Published: 2016
    DOI:doi.org/10.1016/j.engfracmech.2016.03.0336
  20. Title:Hygrothermal effects on the translaminar fracture toughness of cross-ply carbon/epoxy laminates: Failure mechanisms
    Author(s); Marín, L.; González, E.V.; Maimí, P.; Trias, D.; Camanho, P.P.
    Source:Composites Science and Technology Volume:122 Pages 130-139- 477 Published: 2016
    DOI:doi.org/10.1016/j.compscitech.2015.10.020
  1. Title: A constitutive model for a novel modular all-steel buckling restrained brace
    Author(s): Piedrafita, D.; Maimi, P.; Cahis, X.
    Source: Engineering Structures Volume: 100 Pages: 326-331 Published: 2015
    Times Cited: 6
    DOI: 10.1016/j.engstruct.2015.06.026 
  2. Title:A new Perforated core buckling restrained brace
    Authors(s):D. Piedrafita; X. Cahis; E. Simon; J. Comas
    Source:Engineering Structures Volume:85 Pages 118-126 Published: 2015
    DOI:10.1016/j.engstruct.2014.12.020
  3. Title: Accurate gamma and MeV-electron track reconstruction with an ultra-low diffusion Xenon/TMA TPC at 10 atm
    Author(s): Gonzalez-Diaz, D.; Alvarez, V.; Borges, F. I. G.; et al.
    Source: Nuclear Instruments & Methods in Physics Research Section a-Accelerators Spectrometers Detectors and Associated Equipment Volume: 804 Pages: 8-24 Published: 2015
    Times Cited: 13
    DOI: 10.1016/j.nima.2015.08.033 
  4. Title: An experimental data reduction method for the Mixed Mode Bending test based on the J-integral approach
    Author(s): Sarrado, C.; Turon, A.; Renart, J.; et al.
    Source: Composites Science and Technology Volume: 117 Pages: 85-91 Published: 2015
    Times Cited: 11
    DOI: 10.1016/j.compscitech.2015.05.021 
  5. Title: An experimental study on matrix crack induced delamination in composite laminates
    Author(s): Zubillaga, L.; Turon, A.; Renart, J.; et al.
    Source: Composite Structures Volume: 127 Pages: 10-17 Published: 2015
    Times Cited: 22
    DOI: 10.1016/j.compstruct.2015.02.077 
  6. Title: An improved measurement of electron-ion recombination in high-pressure xenon gas
    Author(s): Serra, L.; Sorel, M.; Alvarez, V.; et al.
    Source: Journal of Instrumentation Volume: 10 Pages: 21 Published: 2015
    Times Cited: 5
    DOI: 10.1088/1748-0221/10/03/p03025 
  7. Title: Compact tension specimen for orthotropic materials (vol 63, pg 85, 2014)
    Author(s): Ortega, A.; Maimi, P.; Gonzalez, E. V.; et al.
    Source: Composites Part a-Applied Science and Manufacturing Volume: 74 Pages: 140 Published: 2015
    Times Cited: 0
    DOI: 10.1016/j.compositesa.2015.04.011 
  8. Title: Damage tolerance optimization of composite stringer run-out under tensile load
    Author(s): Badallo, P.; Trias, D.; Lindgaard, E.
    Source: Composite Structures Volume: 133 Pages: 98-104 Published: 2015
    Times Cited: 0
    DOI: 10.1016/j.compstruct.2015.07.025 
  9. Title: Experimental and analytical investigation into the flexural performance of RC beams with partially and fully bonded NSM FRP bars/strips
    Author(s): Sharaky, I. A.; Torres, L.; Sallam, H. E. M.
    Source: Composite Structures Volume: 122 Pages: 113-126 Published: 2015
    Times Cited: 21
    DOI: 10.1016/j.compstruct.2014.11.057 
  10. Title: Experimental study of bond-slip of GFRP bars in concrete under sustained loads
    Author(s): Vilanova, I.; Baena, M.; Torres, L.; et al.
    Source: Composites Part B-Engineering Volume: 74 Pages: 42-52 Published: 2015
    Times Cited: 15
    DOI: 10.1016/j.compositesb.2015.01.006 
  11. Title: Flexural Behavior of Fire-Damaged Reinforced Concrete Slabs Repaired with Near-Surface Mounted (NSM) Carbon Fiber Reinforced Polymer (CFRP) Rods
    Author(s): Thi, C. N.; Pansuk, W.; Torres, L.
    Source: Journal of Advanced Concrete Technology Volume: 13 Issue: Pages: 15-29 Published: 2015
    Times Cited: 2
    DOI: 10.3151/jact.13.15 
  12.  Title: Geometric model for 3D through-thickness orthogonal interlock composites
    Author(s): Isart, N.; Mayugo, J. A.; Blanco, N.; et al.
    Source: Composite Structures Volume: 119 Pages: 787-798 Published: 2015
    Times Cited: 6
    DOI: 10.1016/j.compstruct.2014.09.044 
  13. Title: Internal geometric modelling of 3D woven composites: A comparison between different approaches
    Author(s): Isart, N.; El Said, B.; Ivanov, D. S.; et al.
    Source: Composite Structures Volume: 132 Pages: 1219-1230 Published: 2015
    Times Cited: 14
    DOI: 10.1016/j.compstruct.2015.07.007 
  14.  Title: Ionization and scintillation of nuclear recoils in gaseous xenon
    Author(s): Renner, J.; Gehman, V. M.; Goldschmidt, A.; et al.
    Source: Nuclear Instruments & Methods in Physics Research Section a-Accelerators Spectrometers Detectors and Associated Equipment Volume: 793 Pages: 62-74 Published: 2015
    Times Cited: 9
    DOI: 10.1016/j.nima.2015.04.057 
  15. Title: Modelling of tension-stiffening in bending RC elements based on equivalent stiffness of the rebar
    Author(s): Torres, L.; Barris, C.; Kaklauskas, G.; et al.
    Source: Structural Engineering and Mechanics Volume: 53 Issue: Pages: 997-1016 Published: 2015
    Times Cited: 0
  16. Title: Net-tension strength of double-lap joints under bearing-bypass loading conditions using the cohesive zone model
    Author(s): Kabeel, A. M.; Maimi, P.; Gonzalez, E. V.; et al.
    Source: Composite Structures Volume: 119 Pages: 443-451 Published: 2015
    Times Cited: 3
    DOI: 10.1016/j.compstruct.2014.08.036 
  17. Title: PMT calibration of a scintillation detector using primary scintillation
    Author(s): Freitas, E. D. C.; Fernandes, L. M. P.; Yahlali, N.; et al.
    Source: Journal of Instrumentation Volume: 10 Pages: 11 Published: 2015
    Times Cited: 0
    DOI: 10.1088/1748-0221/10/02/c02039 
  18. Title: Radiopurity assessment of the tracking readout for the NEXT double beta decay experiment
    Author(s): Cebrian, S.; Perez, J.; Bandac, I.; et al.
    Source: Journal of Instrumentation Volume: 10 Pages: 16 Published: 2015
    Times Cited: 9
    DOI: 10.1088/1748-0221/10/05/p05006 
  19. Title: Radon and material radiopurity assessment for the NEXT double beta decay experiment
    Author(s): Cebrian, S.; Perez, J.; Bandac, I.; et al.
    Source: Low Radioactivity Techniques 2015 Volume: 1672 Published: 2015
    Times Cited: 4
    DOI: 10.1063/1.4927990 
  20. Title: Shear strain influence in the service response of FRP reinforced concrete beams
    Author(s): Ferreira, D.; Oller, E.; Barris, C.; et al.
    Source: Composite Structures Volume: 121 Pages: 142-153 Published: 2015
    Times Cited: 4
    DOI: 10.1016/j.compstruct.2014.11.006 
  21. Title: Short and long-term cracking behaviour of GFRP reinforced concrete beams
    Author(s): Mias, C.; Torres, L.; Guadagnini, M.; et al.
    Source: Composites Part B-Engineering Volume: 77 Pages: 223-231 Published: 2015
    Times Cited: 10
    DOI: 10.1016/j.compositesb.2015.03.024 
  1. Title: Present Status and Future Perspectives of the NEXT Experiment
    Author(s): Cadenas, J. J. G.; Alvarez, V.; Borges, F. I. G.; et al.
    Source: Advances in High Energy Physics Pages: 22 Published: 2014
    DOI: 10.1155/2014/907067
  2.  Title: Measurement of the in situ transverse tensile strength of composite plies by means of the real time monitoring of microcrackingAuthor(s): Sebaey, T. A.; Costa, J.; Maimi, P.; et al.
    Source: Composites Part B-Engineering Volume: 65 Pages: 40-46 Published: 2014
    DOI: 10.1016/j.compositesb.2014.02.001
  3.  Title: Intralaminar fracture toughness characterisation of woven composite laminates. Part I: Design and analysis of a compact tension (CT) specimenAuthor(s): N. Blanco; D. Trias; S.T. Pinho; P. Robinson
    Source: Engineering Fracture Mechanics Volume: 131 Pages: 349-360 Published: 2014
    DOI: 10.1016/j.engfracmech.2014.08.012
  4.  Title: Intralaminar fracture toughness characterisation of woven composite laminates. Part II: Experimental characterisationAuthor(s): N. Blanco; D. Trias; S.T. Pinho; P. Robinson
    Source: Engineering Fracture Mechanics Volume: 131 Pages: 361-370 Published: 2014
    DOI: 10.1016/j.engfracmech.2014.08.011
  5.  Title: Characterisation of NEXT-DEMO using xenon K-alpha X-raysAuthor(s): Lorca, D.; Martin-Albo, J.; Laing, A.; et al.
    Source: Journal of Instrumentation Volume: 9 Pages: 20 Published: 2014
    DOI: 10.1088/1748-0221/9/10/p10007
  6.  Title: Delamination Under Fatigue Loads in Composite Laminates: A Review on the Observed Phenomenology and Computational MethodsAuthor(s): Brian L. V. Bak, Carlos Sarrado, Albert Turon and Josep Costa
    Source: Applied Mechanics Reviews Volume: 66 Issue: 6 Pages: 24 Published: 2014
    DOI: 10.1115/1.4027647
  7.  Title: Experimental study of tension stiffening in GFRP RC tensile members under sustained loadAuthor(s): Vilanova, I.; Torres, L.; Baena, M.; et al.
    Source: Engineering Structures Volume: 79 Pages: 390-400 Published: 2014
    DOI: 10.1016/j.engstruct.2014.08.037
  8.  Title: Description and commissioning of NEXT-MM prototype: first results from operation in a Xenon-Trimethylamine gas mixtureAuthor(s):Álvarez, V.; Ripoll, L.[et al.]
    Source: Journal of Instrumentation Published: November 2014
    DOI: doi:10.1088/1748-0221/9/03/P03010
  9.  Title: Effect of tow-drop gaps on the damage resistance and tolerance of Variable-Stiffness-PanelsAuthor(s): Falco, O.; Lopes, C. S.; Mayugo, J. A.; et al.
    Source: Composite Structures Volume: 116 Pages: 94-103 Published: 2014
    DOI: 10.1016/j.compstruct.2014.05.005
  10.  Title: Experimental and numerical analysis of free-edge delamination by means of a two-fold criterion and a cohesive zone modelAuthor(s): L. Zubillaga, N. Carrere, A. Turon, G. Guillamet, P. Linde
    Source: Composites. Part A Submitted 2014
  11.  Title: Damage occurrence at edges of non-crimp-fabric thin-ply laminates under off-axis uniaxial loadingAuthor(s): Guillamet, G.; Turon, A.; Costa, J.; et al.
    Source: Composites Science and Technology Volume: 98 Pages: 44-50 Published: 2014
    DOI: 10.1016/j.compscitech.2014.04.014
  12.  Title: A continuum constitutive model for the simulation of fabric-reinforced compositesAuthor(s): Martin-Santos, E.; Maimi, P.; Gonzalez, E. V.; et al.
    Source: Composite Structures Volume: 111 Pages: 122-129 Published: 2014
    DOI: 10.1016/j.compstruct.2013.12.024
  13.  Title: Compact tension specimen for orthotropic materialsAuthor(s): Ortega, A.; Maimi, P.; Gonzalez, E. V.; et al.
    Source: Composites Part a-Applied Science and Manufacturing Volume: 63 Pages: 85-93 Published: 2014
    DOI: doi:10.1016/j.compositesa.2014.04.012
  14.  Title: Net-tension strength of double lap joints taking into account the material cohesive lawAuthor(s): Kabeel, A. M.; Maimi, P.; Gascons, N.; et al.
    Source: Composite Structures Volume: 112 Pages: 207-213 Published: 2014
    DOI: 10.1016/j.compstruct.2014.02.008
  15.  Title: Comment to the paper ‘Analysis of Progressive Matrix Cracking in Composite Laminates II. First Ply Failure’ by George J Dvorak and Norman LawsAuthor(s): Maimi, P.; Gonzalez, E. V.; Camanho, P. P.
    Source: Journal of Composite Materials Volume: 48 Issue: 9 Pages: 1139-1141 Published: 2014
    DOI: 10.1177/0021998313483986
  16.  Title: An energy based failure criterion for matrix crack induced delamination in laminated composite structuresAuthor(s): Zubillaga, L.; Turon, A.; Maimi, P.; et al.
    Source: Composite Structures Volume: 112 Pages: 339-344 Published: 2014
    DOI: 10.1016/j.compstruct.2014.02.015
  17. Title: Variable-stiffness composite panels: Defect tolerance under in-plane tensile loading
    Author(s): Falco, O.; Mayugo, J. A.; Lopes, C. S.; et al.
    Source: Composites Part a-Applied Science and Manufacturing Volume: 63 Pages: 21-31 Published: 2014
    DOI: 10.1016/j.compositesa.2014.03.022
  18.  Title: Influence of pre-bond moisture in the adherents on the fracture toughness of bonded joints for composite repairsAuthor(s): Budhe, S.; Rodriguez-Bellido, A.; Renart, J.; et al.
    Source: International Journal of Adhesion and Adhesives Volume: 49 Pages: 80-89 Published: 2014
    DOI: 10.1016/j.ijadhadh.2013.12.007
  19.  Title: Full-Scale Shaking Table Tests on a Substandard RC Building Repaired and Strengthened with Post-Tensioned Metal StrapsAuthor(s): Garcia, R.; Hajirasouliha, I.; Guadagnini, M.; et al.
    Source: Journal of Earthquake Engineering Volume: 18 Issue: 2 Pages: 187-213 Published: 2014
    DOI: 10.1080/13632469.2013.847874
  20.  Title: Effects of interply hybridization on the damage resistance and tolerance of composite laminatesAuthor(s): Gonzalez, E. V.; Maimi, P.; de Aja, J. R. S.; et al.
    Source: Composite Structures Volume: 108 Pages: 319-331 Published: 2014
    DOI: 10.1016/j.compstruct.2013.09.037
  21.  Title: Variable-stiffness composite panels: As-manufactured modeling and its influence on the failure behaviorAuthor(s): Falco, O.; Mayugo, J. A.; Lopes, C. S.; et al.
    Source: Composites Part B-Engineering Volume: 56 Pages: 660-669 Published: 2014
    DOI: 10.1016/j.compositesb.2013.09.003
  22.  Title: Characterization of a medium size Xe/TMA TPC instrumented with microbulk Micromegas, using low-energy gamma-raysAuthor(s): Alvarez, V.; Borges, Figm; Carcel, S.; et al.
    Source: Journal of Instrumentation Volume: 9 Published: 2014
    DOI: 10.1088/1748-0221/9/04/c04015
  1. Title: A comparative study of genetic algorithms for the multi-objective optimization of composite stringers under compression loads
    Author(s): Badallo, P.; Trias, D.; Marin, L.; et al.
    Source: Composites Part B-Engineering Volume: 47 Pages: 130-136 Published: 2013
    DOI: 10.1016/j.compositesb.2012.10.037
  2. Title: Experimental study of immediate and time-dependent deflections of GFRP reinforced concrete beams
    Author(s): Mias, C.; Torres, L.; Turon, A.; et al.
    Source: Composite Structures Volume: 96 Pages: 279-285 Published: 2013
    DOI: 10.1016/j.compstruct.2012.08.052
  3. Title: Effect of different material and construction details on the bond behaviour of NSM FRP bars in concreteAuthor(s): Sharaky, I. A.; Torres, L.; Baena, M.; et al.
    Source: Construction and Building Materials Volume: 38 Pages: 890-902 Published: 2013
    DOI: 10.1016/j.conbuildmat.2012.09.015
  4.  Title: Analysis of cracking behaviour and tension stiffening in FRP reinforced concrete tensile elementsAuthor(s): Baena, M.; Torres, Ll; Turon, A.; et al.
    Source: Composites Part B-Engineering Volume: 45 Issue: 1 Pages: 1360-1367 Published 2013                                                                     DOI:10.1016/j.compositesb.2012.07.026
  5.  Title: Effect of material properties on long-term deflections of GFRP reinforced concrete beamsAuthor(s): Mias, C.; Torres, Ll; Turon, A.; et al.
    Source: Construction and Building Materials Volume: 41 Pages: 99-108 Published: 2013
    DOI: 10.1016/j.conbuildmat.2012.11.055
  6.  Title: An experimental study of different factors affecting the bond of NSM FRP bars in concreteAuthor(s): Sharaky, I. A.; Torres, L.; Baena, M.; et al.
    Source: Composite Structures Volume: 99 Pages: 350-365 Published: 2013
    DOI: 10.1016/j.compstruct.2012.12.014
  7.  Title: Near-intrinsic energy resolution for 30-662 keV gamma rays in a high pressure xenon electroluminescent TPCAuthor(s): Alvarez, V.; Borges, F. I. G. M.; Carcel, S.; et al.
    Source: Nuclear Instruments & Methods in Physics Research Section a-Accelerators Spectrometers Detectors and Associated Equipment, Volume: 708 Pages:101-114 Published: 2013 DOI: 10.1016/j.nima.2012.12.123
  8.  Title::A new slotted buckling restrained braceAuthor(s): Daniel Piedrafita; Xavier Cahis, Dr; Enric Simon; Jordi Comas
    Source: Engineering Structures: Volume 56 Pages: 1967-1975 Published: 2013
    DOI: 110.1002/eqe.2423
  9.  Title: Size Effect Law and Critical Distance Theories to Predict the Nominal Strength of Quasibrittle StructuresAuthor(s): Maimi, Pere; Gonzalez, Emilio V.; Gascons, Narcis; et al.
    Source: Applied Mechanics Reviews Volume: 65 Issue: 2 Published: 2013
    DOI: 10.1115/1.4024163
  10.  Title: Damage resistance and damage tolerance of dispersed CFRP laminates: Design and optimizationAuthor(s): Sebaey, T. A.; Gonzalez, E. V.; Lopes, C. S.; et al.
    Source: Composite Structures Volume: 95 Pages: 569-576 Published: 2013
    DOI: 10.1016/j.compstruct.2012.07.005
  11.  Title: Damage resistance and damage tolerance of dispersed CFRP laminates: Effect of the mismatch angle between pliesAuthor(s): Sebaey, T. A.; Gonzalez, E. V.; Lopes, C. S.; et al.
    Source: Composite Structures Volume: 101 Pages: 255-264 Published: 2013
    DOI: 10.1016/j.compstruct.2013.01.026
  12.  Title:Assessment of the influence of the crack monitoring method in interlaminar fatigue tests using fiber Bragg grating sensorsAuthor(s): Sans, D.; Renart, J.; Costa, J.; Gascons, N.; Mayugo, J.A.,
    Source: Composites Science and Technology Volume: 84 Pages: 44-50 Published: 2013
    DOI:10.1016/j.compscitech.2013.04.022 / 
  13.  Title: Cracking and deflections in GFRP RC beams: An experimental studyAuthor(s): Barris, C.; Torres, L.; Comas, J.; et al.
    Source: Composites Part B-Engineering Volume: 55 Pages: 580-590 Published: 2013
    DOI: 10.1016/j.compositesb.2013.07.019
  14.  Title: Comparative analysis of deformations and tension-stiffening in concrete beams reinforced with GFRP or steel bars and fibersAuthor(s): Gribniak, Viktor; Kaklauskas, Gintaris; Torres, Lluis; et al.
    Source: Composites Part B-Engineering Volume: 50 Pages: 158-170 Published: 2013
    DOI: 10.1016/j.compositesb.2013.02.003
  15.  Title: Design for SLS according to fib Model Code 2010Author(s): Balazs, Gyoergy L.; Bisch, Philippe; Borosnyoi, Adorjan; et al.
    Source: Structural Concrete Volume: 14 Issue: 2 Pages: 99-123 Published: 2013 DOI: 10.1002/suco.201200060
  16.  Title: Prediction of Concrete Shrinkage Occurring Prior to External Loading and Effect on Short-Term Constitutive Modeling and DesignAuthor(s): Gribniak, Viktor; Torres, Lluis; Kaklauskas, Gintaris; et al.
    Source: Advances in Structural Engineering Volume: 16 Issue: 6 Pages: 1061-1080 Published: 2013 DOI: 10.1260/1369-4332.16.6.1061 
  17.  Title: Long-term deflections of reinforced concrete elements: accuracy analysis of predictions by different methodsAuthor(s): Gribniak, Viktor; Bacinskas, Darius; Kacianauskas, Rimantas; et al.
    Source: Mechanics of Time-Dependent Materials Volume: 17 Issue: 3 Pages: 297-313 Published: 2013 DOI: 10.1007/s11043-012-9184-y
  18.  Title: Damage resistance and damage tolerance of dispersed CFRP laminates: The bending stiffness effectAuthor(s): Sebaey, T. A.; Gonzalez, E. V.; Lopes, C. S.; et al.
    Source: Composite Structures Volume: 106 Pages: 30-32 Published: 2013
    DOI: 10.1016/j.compstruct.2013.05.046
  19.  Title: Damage resistance and damage tolerance of dispersed CFRP laminates: Effect of ply clusteringAuthor(s): Sebaey, T. A.; Gonzalez, E. V.; Lopes, C. S.; et al.
    Source: Composite Structures Volume: 106 Pages: 96-103 Published: 2013
    DOI: 10.1016/j.compstruct.2013.05.052
  20.  Title: Numerical model of the hysteretic behavior of connections between waffle slabs and facade supportsAuthor(s): Cahis, X.; Benavent-Climent, A.; Catalan Goni, A.
    Source: Revista Internacional De Metodos Numericos Para Calculo Y Diseno En Ingenieria Volume: 29 Issue: 4 Pages: 248-259 Published: 2013
    DOI: 10.1016/j.rimni.2012.07.007
  21.  Title: Flexural response of reinforced concrete (RC) beams strengthened with near surface mounted (NSM) fibre reinforced polymer (FRP) barsAuthor(s): Sharaky, I. A.; Torres, L.; Comas, J.; et al.
    Source: Composite Structures Volume: 109 Pages: 8-22 Published: 2014
    DOI: 10.1016/j.compstruct.2013.10.051
  22.  Title: Nominal strength of quasi-brittle open hole specimens under biaxial loading conditionsAuthor(s): Kabeel, A. M.; Maimi, P.; Gascons, N.; et al.
    Source: Composites Science and Technology Volume: 87 Pages: 42-49 Published: 2013
    DOI: 10.1016/j.compscitech.2013.07.022
  23.  Title: Two-pheromone Ant Colony Optimization to design dispersed laminates for aeronautical structural applicationsAuthor(s): Sebaey, T. A.; Lopes, C. S.; Blanco, N.; et al.
    Source: Advances in Engineering Software Volume: 66 Pages: 10-18 Published: 2013
    DOI: 10.1016/j.advengsoft.2013.02.002
  24.  Title: Initial results of NEXT-DEMO, a large-scale prototype of the NEXT-100 experimentAuthor(s): Alvarez, V.; Borges, F. I. G.; Carcel, S.; et al.
    Source: Journal of Instrumentation Volume: 8 Published: 2013
    DOI: 10.1088/1748-0221/8/04/p04002
  25.  Title: Design and characterization of the SiPM tracking system of NEXT-DEMO, a demonstrator prototype of the NEXT-100 experimentAuthor(s): Alvarez, V.; Ball, M.; Borges, F. I. G.; et al.
    Source: Journal of Instrumentation Volume: 8 Published: 2013
    DOI: 10.1088/1748-0221/8/05/t05002
  26.  Title: Radiopurity control in the NEXT-100 double beta decay experiment: procedures and initial measurementsAuthor(s): Alvarez, V.; Bandac, I.; Bettini, A.; et al.
    Source: Journal of Instrumentation Volume: 8 Published: 2013
    DOI: 10.1088/1748-0221/8/01/t01002
  27.  Title: Operation and first results of the NEXT-DEMO prototype using a silicon photomultiplier tracking arrayAuthor(s): Alvarez, V.; Borges, F. I. G.; Carcel, S.; et al.
    Source: Journal of Instrumentation Volume: 8 Published: 2013
    DOI: 10.1088/1748-0221/8/09/p09011
  28.  Title: Ionization and scintillation response of high-pressure xenon gas to alpha particlesAuthor(s): Alvarez, V.; Borges, F. I. G.; Carcel, S.; et al.
    Source: Journal of Instrumentation Volume: 8 Published: 2013
    DOI: 10.1088/1748-0221/8/05/p05025
  1. Title: A rational method to predict long-term deflections of FRP reinforced concrete members
    Author(s): Torres, Ll; Mias, C.; Turon, A.; et al.
    Source: Engineering Structures Volume: 40 Pages: 230-239 Published: 2012
    DOI: 10.1016/j.engstruct.2012.02.021
  2.  Title: A Strategy to Support Design Processes for Fibre Reinforced Thermoset Composite MaterialsAuthor(s): Gascons, Marc; Blanco, Norbert; Andreu Mayugo, Joan; et al.
    Source: Applied Composite Materials Volume: 19 Issue: 3-4 Pages: 297-314 Published: 2012
    DOI: 10.1007/s10443-011-9203-1
  3.  Title: Assessment of energy dissipation during mixed-mode delamination growth using cohesive zone modelsAuthor(s): Sarrado, C.; Turon, A.; Renart, J.; et al.
    Source: Composites Part a-Applied Science and Manufacturing Volume: 43 Issue: 11 Pages: 2128-2136 Published: 2012
    DOI: 10.1016/j.compositesa.2012.07.009
  4.  Title: Characterization of crack propagation in mode I delamination of multidirectional CFRP laminatesAuthor(s): Sebaey, T. A.; Blanco, N.; Costa, J.; et al.
    Source: Composites Science and Technology Volume: 72 Issue: 11 Pages: 1251-1256 Published: 2012
    DOI: 10.1016/j.compscitech.2012.04.011
  5.  Title: Crack tip identification with long FBG sensors in mixed-mode delaminationAuthor(s): Sans, D.; Stutz, S.; Renart, J.; et al.
    Source: Composite Structures Volume: 94 Issue: 9 Pages: 2879-2887 Published: 2012
    DOI: 10.1016/j.compstruct.2012.03.032
  6.  Title: DESIGN OF FRP REINFORCED CONCRETE BEAMS FOR SERVICEABILITY REQUIREMENTSAuthor(s): Barris, Cristina; Torres, Lluis; Mias, Cristina; et al.
    Source: Journal of Civil Engineering and Management Volume: 18 Issue: 6 Pages: 843-857 Published: 2012
    DOI: 10.3846/13923730.2012.720934
  7.  Title: Design procedure and simplified equations for the flexural capacity of concrete members reinforced with fibre-reinforced polymer barsAuthor(s): Torres, Lluis; Neocleous, Kyriacos; Pilakoutas, Kypros
    Source: Structural Concrete Volume: 13 Issue: 2 Pages: 119-129 Published: 2012
    DOI: 10.1002/suco.201100045
  8.  Title: Dynamic roughness and power dissipation of polymer films actuated with liquid crystal polymer inclusionsAuthor(s): Gutierrez, J. M.; Barbero, E. J.; Cairns, D. R.; et al.
    Source: Smart Materials and Structures Volume: 21 Issue: 1 Published: 2012
    DOI: 10.1088/0964-1726/21/1/015003
  9.  Title: Evolution of manufacturing processes for fiber-reinforced thermoset tanks, vessels, and silos: a reviewAuthor(s): Gascons, Marc; Blanco, Norbert; Matthys, Koen
    Source: IIE Transactions Volume: 44 Issue: 6 Pages: 476-489 Published: 2012
    DOI:10.1080/0740817X.2011.590177
  10.  Title: Impact of the Fibre Bed on Resin Viscosity in Liquid Composite Moulding SimulationsAuthor(s): Gascons, Marc; Blanco, Norbert; Simacek, Pavel; et al.
    Source: Applied Composite Materials Volume: 19 Issue: 3-4 Pages: 669-688 Published: 2012
    DOI: 10.1007/s10443-011-9218-7
  11.  Title: Micromechanics of hemp strands in polypropylene compositesAuthor(s): Vallejos, M. E.; Espinach, F. X.; Julian, F.; et al.
    Source: Composites Science and Technology Volume: 72 Issue: 10 Pages: 1209-1213 Published: 2012
    DOI: 10.1016/j.compscitech.2012.04.005
  12.  Title: NEXT-100 Technical Design Report (TDR). Executive summaryAuthor(s): Alvarez, V.; Borges, F. I. G. M.; Carcel, S.; et al.
    Source: Journal of Instrumentation Volume: 7 Published: 2012
    DOI: 10.1088/1748-0221/7/06/t06001
  13.  Title: Nominal strength of quasi-brittle open hole specimensAuthor(s): Maimi, P.; Trias, D.; Gonzalez, E. V.; et al.
    Source: Composites Science and Technology Volume: 72 Issue: 10 Pages: 1203-1208 Published: 2012
    DOI: 10.1016/j.compscitech.2012.04.004
  14.  Title: Optimization of composite stiffened panels under mechanical and hygrothermal loads using neural networks and genetic algorithmsAuthor(s): Marin, L.; Trias, D.; Badallo, P.; et al.
    Source: Composite Structures Volume: 94 Issue: 11 Pages: 3321-3326 Published: 2012
    DOI: 10.1016/j.compstruct.2012.04.024
  15.  Title: RESEARCH ON THE SUITABILITY OF ORGANOSOLV SEMI-CHEMICAL TRITICALE FIBERS AS REINFORCEMENT FOR RECYCLED HDPE COMPOSITESAuthor(s): El Mansouri, Nour-Eddine; Espinach, Francesc X.; Julian, Fernando; et al.
    Source: Bioresources Volume: 7 Issue: 4 Pages: 5032-5047 Published: 2012
  16.  Title: Serviceability Limit State of FRP RC BeamsAuthor(s): Barris, Cristina; Torres, Lluis; Baena, Marta; et al.
    Source: Advances in Structural Engineering Volume: 15 Issue: 4 Pages: 653-663 Published: 2012
  17.  Title: Simulation of drop-weight impact and compression after impact tests on composite laminatesAuthor(s): Gonzalez, E. V.; Maimi, P.; Camanho, P. P.; et al.
    Source: Composite Structures Volume: 94 Issue: 11 Pages: 3364-3378 Published: 2012
    DOI: 10.1016/j.compstruct.2012.05.015
  18.  Title: SiPMs coated with TPB: coating protocol and characterization for NEXTAuthor(s): Alvarez, V.; Agramunt, J.; Ball, M.; et al.
    Source: Journal of Instrumentation Volume: 7 Published: 2012
    DOI: 10.1088/1748-0221/7/02/p02010
  1. Title: Ant Colony Optimization for dispersed laminated composite panels under biaxial loading
    Author(s): Sebaey, T. A.; Lopes, C. S.; Blanco, N.; et al.
    Source: Composite Structures Volume: 94 Issue: 1 Pages: 31-36 Published: 2011
    DOI: 10.1016/j.compstruct.2011.07.021
  2.  Title: Crack propagation in quasi-brittle two-dimensional isotropic latticesAuthor(s): Maimi, P.; Turon, A.; Trias, D.
    Source: Engineering Fracture Mechanics Volume: 78 Issue: 1 Pages: 60-70 Published: 2011
    DOI: 10.1016/j.engfracmech.2010.09.014
  3.  Title: Effects of ply clustering in laminated composite plates under low-velocity impact loadingAuthor(s): Gonzalez, E. V.; Maimi, P.; Camanho, P. P.; et al.
    Source: Composites Science and Technology Volume: 71 Issue: 6 Pages: 805-817 Published: 2011
    DOI: 10.1016/j.compscitech.2010.12.018
  4.  Title: Exact, integrated and complete solutions for composite flywheelsAuthor(s): Perez-Aparicio, Jose L.; Ripoll, Lluis
    Source: Composite Structures Volume: 93 Issue: 5 Pages: 1404-1415 Published: 2011
    DOI: 10.1016/j.compstruct.2010.11.011
  5.  Title: Experimental study and code predictions of fibre reinforced polymer reinforced concrete (FRP RC) tensile membersAuthor(s): Baena, M.; Turon, A.; Torres, Ll; et al.
    Source: Composite Structures Volume: 93 Issue: 10 Pages: 2511-2520 Published: 2011
    DOI: 10.1016/j.compstruct.2011.04.012 
  6.  Title: Experimental study and code predictions of fibre reinforced polymer reinforced concrete (FRP RC) tensile members (vol 93, pg 2511, 2011)Author(s): Baena, M.; Turon, A.; Torres, Ll; et al.
    Source: Composite Structures Volume: 94 Issue: 1 Pages: 312 Published: 2011
    DOI: 10.1016/j.compstruct.2011.07.007
  7.  Title: Matrix cracking and delamination in laminated composites. Part I: Ply constitutive law, first ply failure and onset of delaminationAuthor(s): Maimi, P.; Camanho, P. P.; Mayugo, J. A.; et al.
    Source: Mechanics of Materials Volume: 43 Issue: 4 Pages: 169-185 Published: 2011
    DOI: 10.1016/j.mechmat.2010.12.003
  8.  Title: Matrix cracking and delamination in laminated composites. Part II: Evolution of crack density and delaminationAuthor(s): Maimi, P.; Camanho, P. P.; Mayugo, J. A.; et al.
    Source: Mechanics of Materials Volume: 43 Issue: 4 Pages: 194-211 Published: 2011
    DOI: 10.1016/j.mechmat.2011.01.002
  9.  Title: Numerical and experimental analysis of stresses and failure in T-bolt jointsAuthor(s): Martinez, Victor; Gueemes, Alfredo; Trias, Dani; et al.
    Source: Composite Structures Volume: 93 Issue: 10 Pages: 2636-2645 Published: 2011
    DOI: 10.1016/j.compstruct.2011.04.031
  10.  Title: Numerical implementation and experimental validation of a through-the-thickness temperature model for non-isothermal vacuum bagging infusionAuthor(s): Gascons, M.; Blanco, N.; Vives, J.; et al.
    Source: Journal of Reinforced Plastics and Composites Volume: 30 Issue: 18 Pages: 1557-1570 Published: 2011
    DOI: 10.1177/0731684411423321
  11.  Title: Numerical investigation to prevent crack jumping in Double Cantilever Beam tests of multidirectional composite laminatesAuthor(s): Sebaey, T. A.; Blanco, N.; Lopes, C. S.; et al.
    Source: Composites Science and Technology Volume: 71 Issue: 13 Pages: 1587-1592 Published: 2011
    DOI: 10.1016/j.compscitech.2011.07.002
  12.  Title: Side Clamped Beam (SCB) hinge system for delamination tests in beam-type composite specimensAuthor(s): Renart, J.; Blanco, N.; Pajares, E.; et al.
    Source: Composites Science and Technology Volume: 71 Issue: 8 Pages: 1023-1029 Published: 2011
    DOI: 10.1016/j.compscitech.2010.10.005
  1. Title: A simplified method to obtain time-dependent curvatures and deflections of concrete members reinforced with FRP bars
    Author(s): Mias, C.; Torres, Ll; Turon, A.; et al.
    Source: Composite Structures Volume: 92 Issue: 8 Pages: 1833-1838 Published: 2010
    DOI: 10.1016/j.compstruct.2010.01.016
  2.  Title: Accurate simulation of delamination growth under mixed-mode loading using cohesive elements: Definition of interlaminar strengths and elastic stiffnessAuthor(s): Turon, A.; Camanho, P. P.; Costa, J.; et al.
    Source: Composite Structures Volume: 92 Issue: 8 Pages: 1857-1864 Published: 2010
    DOI: 10.1016/j.compstruct.2010.01.012
  3.  Title: Analytical Modelling of Transverse Matrix Cracking of +/-theta/90(n) (s) Composite Laminates under Multiaxial LoadingAuthor(s): Mayugo, J. A.; Camanho, P. P.; Maimi, P.; et al.
    Source: Mechanics of Advanced Materials and Structures Volume: 17 Issue: 4 Pages: 237-245 Published: 2010
    DOI: 10.1080/15376490903056577
  4.  Title: Comparative Study of Deflection Equations for FRP RC BeamsAuthor(s): Vilanova, I.; Barris, C.; Torres, Ll; et al.
    Source: Advances in Frp Composites in Civil Engineering Pages: 744-747 Published: 2010
  5.  Title: DETERMINING CURVATURE OF AIR BENT PARTS BY DIGITAL IMAGE PROCESSINGAuthor(s): Garcia-Romeu, M. L.; Mayugo, J. A.; Ciurana, J.
    Source: International Journal of Material Forming Volume: 3 Pages: 105-108 Published: 2010
    DOI: 10.1007/s12289-010-0718-z
  6.  Title: Experimental Study of Time-dependent Behaviour of Concrete Members Reinforced with GFRP BarsAuthor(s): Mias, C.; Torres, L. I.; Turon, A.; et al.
    Source: Advances in Frp Composites in Civil Engineering Pages: 352-355 Published: 2010
  7.  Title: Experimental Study on the Tension Stiffening Effect of GFRP RC ElementsAuthor(s): Baena, M.; Turon, A.; Torres, Ll; et al.
    Source: Advances in Frp Composites in Civil Engineering Pages: 271-274 Published: 2010
  8.  Title: Experimental testing of a new anti-seismic dissipator energy device based on the plasticity of metalsAuthor(s): Franco, J. M.; Cahis, X.; Gracia, L.; et al.
    Source: Engineering Structures Volume: 32 Issue: 9 Pages: 2672-2682 Published: 2010
    DOI: 10.1016/j.engstruct.2010.04.037
  9.  Title: Experiments on Reinforced Brick Masonry Vaulted Light RoofsAuthor(s): Lopez-Almansa, F.; Roca, P.; Sarrablo, V.; et al.
    Source: Aci Structural Journal Volume: 107 Issue: 3 Pages: 355-363 Published: 2010
  10.  Title: Interior wide beam-column connections in existing RC frames subjected to lateral earthquake loadingAuthor(s): Benavent-Climent, A.; Cahis, X.; Vico, J. M.
    Source: Bulletin of Earthquake Engineering Volume: 8 Issue: 2 Pages: 401-420 Published: 2010
    DOI: 10.1007/s10518-009-9144-3
  11.  Title: Selection and scaling of earthquake records in assessment of structures in low-to-moderate seismicity zonesAuthor(s): Catalan, Ariel; Benavent-Climent, Amadeo; Cahis, Xavier
    Source: Soil Dynamics and Earthquake Engineering Volume: 30 Issue: 1-2 Pages: 40-49 Published: 2010
    DOI: 10.1016/j.soildyn.2009.09.003

2009

  1. Title: A low-tech dissipative buckling restrained brace. Design, analysis, production and testing
    Author(s): Palazzo, G.; Lopez-Almansa, F.; Cahis, X.; et al.
    Source: Engineering Structures Volume: 31 Issue: 9 Pages: 2152-2161 Published: 2009
    DOI: 10.1016/j.engstruct.2009.03.015
  2.  Title: An experimental study of the flexural behaviour of GFRP RC beams and comparison with prediction modelsAuthor(s): Barris, C.; Torres, Ll; Turon, A.; et al.
    Source: Composite Structures Volume: 91 Issue: 3 Pages: 286-295 Published: 2009
    DOI: 10.1016/j.compstruct.2009.05.005
  3.  Title: Experimental study of bond behaviour between concrete and FRP bars using a pull-out testAuthor(s): Baena, Marta; Torres, Lluis; Turon, Albert; et al.
    Source: Composites Part B-Engineering Volume: 40 Issue: 8 Pages: 784-797 Published: 2009
    DOI: 10.1016/j.compositesb.2009.07.003
  4.  Title: Exterior wide beam-column connections in existing RC frames subjected to lateral earthquake loadsAuthor(s): Benavent-Climent, A.; Cahis, X.; Zahran, R.
    Source: Engineering Structures Volume: 31 Issue: 7 Pages: 1414-1424 Published: 2009
    DOI: 10.1016/j.engstruct.2009.02.008
  5.  Title: Low-velocity impact damage on dispersed stacking sequence laminates. Part II: Numerical simulationsAuthor(s): Lopes, C. S.; Camanho, P. P.; Gurdal, Z.; et al.
    Source: Composites Science and Technology Volume: 69 Issue: 7-8 Pages: 937-947 Published: 2009
    DOI: 10.1016/j.compscitech.2009.02.015
  6.  Title: Reinforced Concrete Exterior Waffle Flat Plate-Column Connections Subjected to Lateral Earthquake LoadingAuthor(s): Benavent-Climent, A.; Cahis, X.; Catalan, A.
    Source: Journal of Earthquake Engineering Volume: 13 Issue: 3 Pages: 275-292 Published: 2009
    DOI: 10.1080/13632460802598453
  7.  Title: Simulation of delamination by means of cohesive elements using an explicit finite element codeAuthor(s): Gonzalez, E. V.; Maimi, P.; Turon, A.; et al.
    Source: Cmc-Computers Materials & Continua Volume: 9 Issue: 1 Pages: 51-92 Published: 2009

2008

  1. Title: A Three-dimensional Damage Model for Transversely Isotropic Composite Laminates
    Author(s): Maimi, P.; Mayugo, J. A.; Camanho, P. P.
    Source: Journal of Composite Materials Volume: 42 Issue: 25 Pages: 2717-2745 Published: 2008
    DOI: 10.1177/0021998308094965
  2.  Title: Analytical and Numerical Investigation of the Length of the Cohesive Zone in Delaminated Composite MaterialsAuthor(s): Turon, Albert; Costa, Josep; Camanho, Pedro P.; et al.
    Source: Mechanical Response of Composites Volume: 10 Pages: 77-97 Published: 2008
  3.  Title: Effective simulation of delamination in aeronautical structures using shells and cohesive elementsAuthor(s): Davila, Carlos G.; Camanho, Pedro P.; Turon, Albert
    Source: Journal of Aircraft Volume: 45 Issue: 2 Pages: 663-672 Published: 2008
    DOI: 10.2514/1.32832
  4.  Title: Mechanical and Manufacturing Optimization of a Large Vessel through SimulationAuthor(s): Gascons, M.; Blanco, N.; Matthys, K.
    Source: Recent Advances in Textile Composites Pages: 524-531 Published: 2008
  5.  Title: Mechanical hinge system for delamination tests in beam-type composite specimensAuthor(s): Blanco, N.; Gamstedt, E. K.; Costa, J.
    Source: Composites Science and Technology Volume: 68 Issue: 7-8 Pages: 1837-1842 Published: 2008
    DOI: 10.1016/j.compscitech.2008.01.011
  6.  Title: Seismic behavior of interior connections in existing waffle-flat-plate structuresAuthor(s): Benavent-Climent, A.; Cahis, X.; Catalan, A.
    Source: Engineering Structures Volume: 30 Issue: 9 Pages: 2510-2516 Published: 2008
    DOI: 10.1016/j.engstruct.2008.02.004

2007

  1. Title: A comparison of different side information generation methods for multiview distributed video coding
    Author(s): Artigas, Xavi; Tarres, Francesc; Torres, Luis
    Source: SIGMAP 2007: Proceedings of the Second International Conference on Signal Processing and Multimedia Applications Pages: 450-455 Published: 2007
  2. Title: A continuum damage model for composite laminates: Part I – Constitutive model
    Author(s): Maimi, P.; Camanho, P. P.; Mayugo, J. A.; et al.
    Source: Mechanics of Materials Volume: 39 Issue: 10 Pages: 897-908 Published: 2007
    DOI: 10.1016/j.mechmat.2007.03.005
  3. Title: A continuum damage model for composite laminates: Part II – Computational implementation and validation
    Author(s): Maimi, P.; Camanho, P. P.; Mayugo, J. A.; et al.
    Source: Mechanics of Materials Volume: 39 Issue: 10 Pages: 909-919 Published: 2007
    Times Cited: 98
    DOI: 10.1016/j.mechmat.2007.03.006
  4. Title: An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models
    Author(s): Turon, A.; Davila, C. G.; Camanho, P. P.; et al.
    Source: Engineering Fracture Mechanics Volume: 74 Issue: 10 Pages: 1665-1682 Published: 2007
    DOI: 10.1016/j.engfracmech.2006.08.025
  5.  Title: Prediction of size effects in notched laminates using continuum damage mechanicsAuthor(s): Camanho, P. P.; Maimi, P.; Davila, C. G.
    Source: Composites Science and Technology Volume: 67 Issue: 13 Pages: 2715-2727 Published: 2007
    DOI: 10.1016/j.compscitech.2007.02.005
  6.  Title: Quality control of CFRP by means of digital image processing and statistical point pattern analysisAuthor(s): Trias, D.; Garcia, R.; Costa, J.; et al.
    Source: Composites Science and Technology Volume: 67 Issue: 11-12 Pages: 2438-2446 Published: 2007
    DOI: 10.1016/j.compscitech.2006.12.023
  7.  Title: Simulation of delamination in composites under high-cycle fatigueAuthor(s): Turon, A.; Costa, J.; Camanho, P. P.; et al.
    Source: Composites Part a-Applied Science and Manufacturing Volume: 38 Issue: 11 Pages: 2270-2282 Published: 2007
    DOI: 10.1016/j.compositesa.2006.11.009

2006

  1. Title: A damage model for the simulation of delamination in advanced composites under variable-mode loading
    Author(s): Turon, A.; Camanho, P. P.; Costa, J.; et al.
    Source: Mechanics of Materials Volume: 38 Issue: 11 Pages: 1072-1089 Published: 2006
    DOI: 10.1016/j.mechmat.2005.10.003
  2.  Title: A two-scale method for matrix cracking probability in fibre-reinforced composites based on a statistical representative volume elementAuthor(s): Trias, Daniel; Costa, Josep; Fiedler, Bodo; et al.
    Source: Composites Science and Technology Volume: 66 Issue: 11-12 Pages: 1766-1777 Published: 2006
    DOI: 10.1016/j.compscitech.2005.10.030
  3.  Title: An exact solution for the determination of the mode mixture in the mixed-mode bending delamination testAuthor(s): Blanco, N.; Turon, A.; Costa, J.
    Source: Composites Science and Technology Volume: 66 Issue: 10 Pages: 1256-1258 Published: 2006
    DOI: 10.1016/j.compscitech.2005.10.028
  4.  Title: Analysis of the mixed-mode end load split delamination testAuthor(s): Blanco, N.; Gamstedt, E. K.; Costa, J.; et al.
    Source: Composite Structures Volume: 76 Issue: 1-2 Pages: 14-20 Published: 2006
    DOI: 10.1016/j.compstruct.2006.06.003
  5.  Title: Determination of the critical size of a statistical representative volume element (SRVE) for carbon reinforced polymersAuthor(s): Trias, D.; Costa, J.; Turon, A.; et al.
    Source: Acta Materialia Volume: 54 Issue: 13 Pages: 3471-3484 Published: 2006
    DOI: 10.1016/j.actamat.2006.03.042
  6.  Title: Finite element modeling of plain weave fabrics from photomicrograph measurementsAuthor(s): Barbero, E. J.; Trovillion, J.; Mayugo, J. A.; et al.
    Source: Composite Structures Volume: 73 Issue: 1 Pages: 41-52 Published: 2006
    DOI: 10.1016/j.compstruct.2005.01.030
  7.  Title: Random models versus periodic models for fibre reinforced compositesAuthor(s): Trias, D.; Costa, J.; Mayugo, J. A.; et al.
    Source: Computational Materials Science Volume: 38 Issue: 2 Pages: 316-324 Published: 2006
    DOI: 10.1016/j.commatsci.2006.03.005

2005

  1. Title: A progressive damage model for unidirectional fibre-reinforced composites based on fibre fragmentation. Part I: Formulation
    Author(s): Turon, A.; Costa, J.; Maimi, P.; et al.
    Source: Composites Science and Technology Volume: 65 Issue: 13 Pages: 2039-2048 Published: 2005
    DOI: 10.1016/j.compscitech.2005.04.012
  2. Title: A progressive damage model for unidirectional fibre-reinforced composites based on fibre fragmentation. Part II: Stiffness reduction in environment sensitive fibres under fatigue
    Author(s): Costa, J.; Turon, A.; Trias, D.; et al.
    Source: Composites Science and Technology Volume: 65 Issue: 14 Pages: 2269-2275 Published: 2005
    DOI: 10.1016/j.compscitech.2005.05.011

2004

  1. Title: A proposed semi-prefabricated prestressed composite slab
    Author(s): Bozzo, L. M.; Torres, L.
    Source: Proceedings of the Institution of Civil Engineers-Structures and Buildings Volume: 157 Issue: 5 Pages: 309-317 Published: 2004
  2.  Title: Mixed-mode delamination growth in carbon-fibre composite laminates under cyclic loadingAuthor(s): Blanco, N.; Gamstedt, E. K.; Asp, L. E.; et al.
    Source: International Journal of Solids and Structures Volume: 41 Issue: 15 Pages: 4219-4235 Published: 2004
    DOI: 10.1016/j.ijsolstr.2004.02.040
  3.  Title: Tension-stiffening model for cracked flexural concrete membersAuthor(s): Torres, L.; Lopez-Almansa, F.; Bozzo, L. M.
    Source: Journal of Structural Engineering-Asce Volume: 130 Issue: 8 Pages: 1242-1251 Published: 2004
    DOI: 10.1061/(asce)0733-9445(2004)130:8(1242)

2003

  1. Title: A numerical model for sequential construction, repairing and strengthening of 2-D concrete frames
    Author(s): Torres, L. I.; Lopez-Almansa, F.; Cahis, X.; et al.
    Source: Engineering Structures Volume: 25 Issue: 3 Pages: 323-336 Published: 2003
    DOI: 10.1016/s0141-0296(02)00161-x